- Model Number: Double-sided PET/PEO/PEI spring steel sheet textured and smooth
- Item Type: Heat Paper
- Brand Name: IdeaFormer
- Origin: Mainland China
- Size 1: 220x220mm,235x235mm,310x310mm
- Size 2: 257×257,241x253mm,
- Size 3: 350x350mm
- Application:: 3D printer heated bed
Double Sided PET/PEO/PEI/Smooth PEI Magnetic Build Plate Sheet For 3D Printer
180x180mm: Kingroon KP35
220x220mm: Anet A8/Wanhao Duplicator i3 V1 Plus
235x235mm: Ender 3/Ender 3 V2/Ender 5/ Ender 5 Pro/ CR20
257x257mm: Bambu lab x1/ x1C/ P1P/ P1S
241x254mm: Prusa I3 MK3s
300x300mm: Anet A8 plus/Anet et5/ et5 Pro/KP5L
310x310mm: Artillery Sidewinderx1x2/ CR10
350x350mm: FYSETC Voron 2.4
Except above model and also use for other similarly sized hotbed.
If you are not sure which size match your hotbed, please measure again before you place a hotbed sheet.
1. When first time printing, keep the built sheet smoothing (the nozzle and the hot bed distance adjust to A4 paper thickness).
2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.
3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.
4. we suggested printing temperature: PLA 60℃ PETG 70-80℃ ABS 90-100℃.
Start printing in PET and PEO sheet, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (PEO/PET do not exceed 80°C).
PEI sheet can be work in 160°C~180°C for a long period of time, PEI can not over 200°C.
5. Take off the sheet from printing surface and bend the sheet slightly, you can easy to take the model.
1. Double-sided printing sheet, convenient and practical.
2. PEIHigh temperature resistance, scratch resistance, no deformation.
3. No glue, strong stickinessand not easy to warping.
4. Stainless spring steel, good flatness.
DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!!
Except 257x257mm, 241x254mm. Other PET,PEO and PEI must be used with the magnetic base.
If you are going to buy a product without magnetic base,
please make sure you already have a magnetic base.
1 Set Spring Steel Sheet pre-applied Sheet+with or without Magnetic Rubber Plate.
one side is PET/PEO smooth surface,another side is PEI textured surface.
one side is PEO smooth surfce,, another side is textured PEI surface.
Both sides are textured PEI surfce .
one side is textured PEI surfce, another side is smooth PEI surface.
Wipe the print surface before and after a print with Isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength.Regardless of any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface.If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.